Zhejiang Jiu Kun Technology Co., Ltd.
Zhejiang Jiu Kun Technology Co., Ltd.
Add to Cart
Customized supplier integrated mass flow meter calibration converter
Flange type electromagnetic flowmeter consists of the converter of EMF85, and the sensor of flange type.
Flange type sensor uses the way of connecting the flange with pipe,It has various types of electrode material and lining material.
The sensor and converter can be combined into intergrated or split electromagnetic flowmeter.
Flange type electromagnetic flowmeter can be widely used not only in genaral process test,but also
in the chemical industry,water-supply,waste-water monitoring ore pulp or paper plup etc.
| Display | 3-line English LCD display,directly show the data of forward and reverse flow,percentage of the flow and flow velocity. |
Parameter Setting | Setting the parameter with the botton |
| Language | Chinese,English |
| Current Output | 4-20mA, Load Resistance ≤ 500Ω (can choose with HART protocol ) |
| PIO | CCan choose passive pulse output,active pulse output,state output/alarm output. |
Passive pulse output 30VDC(Off),200mA(On); 0.0001~5000HZ; Pulse width:50% duty cycle or the fixed value(≤100ms) | |
| Active pulse output 0.0001~2HZ,≤150mA,15VDC±20%;Pulse width:≤100ms(The default value:20ms) | |
| State/Alarm Output Contact capacity:30VDC(Off), 20mA(On) can choose relay output | |
| Communication | RS485(MODBUS-RTU, MODBUS-ASCⅡ) |
| Power Supply | 220VAC, 24VDC |
| Potection Level | IP65 |
| Accuracy | 0.5, 0.3 |
| Structure | Intergrated type, Split type |
Technical data of Flange type sensor
| Application | All conductive liquid including water,beverage,various of corrosive media and liquid-solid two-phase fluid(mud,paper pulp). |
| Diameter | DN3~DN2000 |
| Pressure | 0.6~4.0MPa(Depend on the different diameters,reference sheet 1,special pressure can be customized) |
| Electrde Material | SS316L,Hc,Hb,Ti,Ta,W,Pt |
| Lining Material | Ne,PTFE,PU,FEP,PFA |
| Temperature | -40~180 ℃(Note:limited by the lining material's temperature resistance,reference sheet 7) |
| Shell Material | Carbon steel(Stainless steel can be customized) |
| Protection Level | IP65,IP67,IP68 |
| Connection | GB/T9119-2010(Can connect with HG20593-2009 flange directly),JIS,ANSI or customized. |